Assembly; Initial Assembly - Pride JAZZY GO 2 Owner's Manual

INITIAL ASSEMBLY

Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly
to make some comfort adjustments. Figure 8 details those parts of the power chair that are designed to be disassembled and
assembled by an end user or by a qualified carer before using the product or making comfort adjustments. There are two hex
keys provided for use with controller installation and adjustment, and foot platform adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores
or through your authorised Pride Dealer.
ARMREST WIDTH ADJUSTMENT
Figure 8. Jazzy Go 2 Assembly View
20
I V . A S S E M B L Y
CONTROLLER
POSITION
www.pridemobility.com
SEAT INSTALLATION
SEAT HEIGHT
ADJUSTMENT
FOOT PLATFORM
DEPTH ADJUSTMENT
BATTERY COVER
BATTERIES
Jazzy Go 2