Table of Contents
Advertisement
The protection assured by the current probe can be compromised if it is used in a
way that is not recommended by the manufacturer.
■ Comply with the rated maximum voltage and current, and the measurement
category. Do not use the current probe on networks where the voltage or
category exceeds those specified.
■ Comply with the conditions of use (e.g. temperature, humidity, altitude, degree
of pollution, location).
■ Do not use the current probe if its housing is open, deteriorated, or incorrectly
reassembled. Before each use, check the integrity of the insulation of the unit,
jaws, clamps, housing, and leads.
■ Do not subject the current probe to water or other liquids.
■ Keep the jaw contacts of the clamp absolutely clean.
■ Use suitable personal protective equipment when hazardous voltages may be
accessible in the installation where the measurement is made.
■ Any repairs must be carried out by accredited skilled personnel.
PRECAUTIONS BEFORE USE
Advertisement
Table of Contents
