AEMC J93 User Manual page 14

For Probes:
■ Press the jaw opening lever on the probe to open the jaws.
■ Clamp the probe around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
I
For AmpFlex and MiniFlex
®
■ AmpFlex : Press simultaneously on both sides of the opening connector.
®
■ MiniFlex : Press the opening device to open the flexible sensor.
®
■ Clamp the sensor around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
■ Close the sensor by pushing the moving part into the connector until it clicks.
NOTE: For details of the measurement configuration and technical specifications,
refer to the user manual of the instrument the current probe is being used with.
Current Probes & Sensors for Power Quality Meters
Sensors:
®
13