Computherm S200 Operating Instruction page 14

c) Pressing the „Home" button of the iOS device send the application to the
background then enter into menu item „Settings/Wi-Fi networks". Press
and hold down the push button on the socket for around 5 seconds. The
green LED on the apparatus blinks three times then illuminates steadily for
a short time and this process is repeated. Press and hold down the but-
ton again for around 5 seconds and the green LED starts to blink briskly
indicating that the apparatus is in tuning mode. At this point the „ITEAD-
xxxxxx" Wi-Fi network should appear on the list of Wi-Fi networks.
(Should you encounter any problem during the further steps of tuning than
we propose you to reset the router to the factory default and attempt tun-
ing again. Another way to attempt tuning: press only once and hold down
the button on the apparatus for a longer time and the green LED on the
apparatus blinks 3 times then illuminates steadily for a short time and this
process is repeated. This blinking indicates the alternative tuning mode).
d) Out of the list of Wi-FI networks offered by the device select the network
- 14 -