Computherm S200 Operating Instruction page 11

twice on the „REGISTER" button and enter into your user account.
Following this, the mobile application is ready for use.
4.2. Connecting the socket to the user account and establishing
connection between the socket and the Wi-Fi network
The apparatus should be connected to the user account differently from
devices which are using the Android or iOS operating system.
4.2.1. In case of devices using the Android operating system you can
connect the socket to the user account and the Wi-Fi network chosen by
means of the following steps:
a) Enable the Wi-Fi connection on your device using the Android operating system.
b) Connect the socket to the mains power in the direct vicinity of the Android-oper-
ated device and the Wi-Fi router selected then wait for ~10 seconds. The Wi-Fi
network selected must have Internet access.
- 11 -