Computherm S200 Operating Instruction page 12

c) Press and hold down the push button on the socket for around 5 seconds. The
LED on the apparatus will blink three times then illuminates steadily for a short
time and this process is repeated. Press and hold down the button again for
around 5 seconds and the green LED starts to blink briskly indicating that the
apparatus is in tuning mode (should you encounter any problem during the fur-
ther steps of tuning then we propose you to reset the router to the factory default
and attempt tuning again. Another way to attempt tuning: press only once and
hold down the button on the apparatus for a longer time and the zöld LED on
the apparatus blinks 3 times then illuminates steadily for a short time and this
process is repeated. This blinking indicates the alternative tuning mode).
d) On the Android device open application „COMPUTHERM S Series" and click
on „+" at the bottom of the screen then on the „Next" button.
e) In the application give the name and password of the Wi-Fi network to
which the socket is to be connected then click on the „Next" button again.
f) Following this, the Android operated device will automatically find the
- 12 -