Table of Contents
Advertisement
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly
to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed to be disassembled and
assembled by an end user or by a qualified carer before using the product or making comfort adjustments.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores
or through your authorised Pride Dealer.
SEATBACK ANGLE ADJUSTMENT
CONTROLLER POSITION
Figure 10. Jazzy 1103 Ultra Assembly View
Jazzy 1103 Ultra
I V .
A S S E M B L Y
ANTI-TIP WHEEL ADJUSTMENT
www.pridemobility.com
SEAT INSTALLATION
SEAT HEIGHT/ANGLE ADJUSTMENT
FOOT PLATFORM HEIGHT/
ADJUSTMENT
21
Advertisement
Table of Contents
