Front Panel Connectors - D-Link DIS-200G-12S Quick Installation Manual

# LED Status
PoE
Solid
Budget
green
100
PoE
Solid
Budget
green
75
PoE
Solid
Budget
1
green
50
Solid
green
PoE
Solid
Budget
amber
25
Blinking
amber
Solid
green
Blinking
Left:
green
2 Ports
Solid
1 - 10
amber
Blinking
amber
Solid
green
Right:
Solid
3
Ports 1 - 8 amber
Blinking
amber
DIS-200G-12S/SW
1, 2
3
2
Description
The power budget is 100% and no PoE is
being used.
The power budget is between 100 and
75%.
The power budget is between 75 and 50%.
The power budget is between 50 and 25%.
The power budget is between 25 and 0%,
but still has more than 15.4 W remaining.
The power budget is between 25 and 0%
and has less than 15.4 W remaining.
Port is connected at 1 Gbps.
There is activity on the port at 1 Gbps.
Port is connected at 10/100 Mbps.
There is activity on the port at 10/100
Mbps.
The PoE output is using IEEE 802.3af/at
and is less than 15.4 W.
The PoE output is using IEEE 802.3at and is
between 15.4 and 30 W.
The PoE output on the port is over 30 W
and the port has been shut down.
Table 2
Figure 3
# LED Status
Solid Port is connected at 1 Gbps.
green
Left:
Blinking The port is undergoing cable diagnostics.
1
Ports 1 - 8 green
Solid Port is connected at 10/100 Mbps.
amber
Blinking There is activity on the port at 1 Gbps.
green
Right:
2
Ports 1 - 8
Blinking There is activity on the port at 10/100
amber Mbps.
Solid Port is connected at 1 Gbps.
green
Blinking There is activity on the port at 1 Gbps.
Left:
green
Ports
3
Solid Port is connected at 10/100 Mbps.
9 - 10
amber
Blinking There is activity on the port at 10/100
amber Mbps.
Table 3

Front Panel Connectors

1
3
4
Figure 4
# Item
This is the reset button which is used to
1 Reset
perform a factory reset.
This is a console port which is used to connect
Console
2
to the DIS-200G using a RJ-45 to serial cable.
These are 10/100/1000 Mbps ports that can
3 Ports 1 to 10 be used to connect to any device using a
standard Category 5/5e RJ-45 Ethernet cable.
These are 1 Gbps SFP ports that can be used
4 Ports 11 to 12 to connect to other switches using compatible
SFP adapters and fiber cable.
Table 4
Description
2
Description