Dürkopp Adler 867 Service Instructions Manual page 67

Sewing feet
Fig. 47: Setting the sewing foot lifting height
Setting steps
1. Loosen the counternut (2) for the adjusting screw (1).
2. Turn the adjusting screw (1) to set the distance between the raised
3. Tighten the counternut (2) for the adjusting screw (1).
Service Instructions 867 - 03.0 - 10/2017
(1) - Adjusting screw
(2) - Counternut
sewing feet and the throat plate:
• To raise the sewing feet to a lesser height: Turn it clockwise
• To raise the sewing feet higher: Turn it counterclockwise
65