Table of Contents
Advertisement
SPA2-2 installation guide
www.renishaw.com
SPA2-2 comms connection
The comms link between the UCC BI and the SPA2-2 is made using two RJ45 cables (P-CA82-0017) provided in the SPA2-2 kit.
The UCC BI port SPA-A should be connected to the SPA2-2 port SPA-A
The UCC BI port SPA-B should be connected to the SPA2-2 port SPA-B
If the provided RJ45 cables are not used then the cables should be no longer than 400 mm in length, CAT 5E and shielded.
NOTE: If 4th axis is required, the SPA2-2 will require the daughtercard interface kit: A-5402-8103.
Issued 01 2018
15
Advertisement
Table of Contents
