Connecting Power - Lanner LVC-5000-B0 User Manual

Connecting Power

Connect the LVC-5000 to a +12V or +24V
vehicle battery. The DC power-in connector
comes with a 3-pin terminal block for its Phoe-
nix contact. This power socket can only accept
the power supply with the right pin contact so be
cautious when inserting power to the system.
Warning:
Connect the power to the DC-IN connector in the
right orientation or the LVC-5000 will be damaged.
Notes: This photo images in this chapter are for reference only. The steps of installing components are the same
for all models (B0, B1, B2, and B3) except slight differences in terms of the number of certain I/O connectors.
5000