Larson Davis SoundTrack LxT N/Forcer Field Operation Manual page 9

M E A S U R E M E N T
Step 1.
Step 2.
Step 3.
9
When making a measurement, hold the
SoundTrack LxT
while pointing the sound level meter at the
noise source.
Press the RUN/PAUSE button to begin.
When the measurement is complete, press
the STOP/STORE button to end the
measurement. The measurement will end
and you will automatically be prompted to
save the measurement. Using the left, right
control buttons under the display screen
you have "Yes", "No" or "Browse" choices
for the file save. Using the Enter key you
can confirm your
selection. Note if
you select No, you
must confirm
delete by pressing
the RESET button
prior to making a
new measurement.
®
extended from the body
I770.04(B)