Hitachi GVX-CC64G*BX User Manual page 62

 Error Log Collection script (hfcrasinfo)
Executing /opt/hitachi/drivers/hba/hfcrasinfo enables you to get log data and
related information to analyze the failure of Hitachi Gigabit Fibre Channel
Adapter when error occurs.
Root privilege is required to execute this batch file. This script is common
among any kernel version of Linux.
Collected log data and information are stored in the directory named
'hfcrasinfo-<computer name>-<date>- <time>" and compressed.
Maximum size of the collected information is as follows. The size varies
depending on whether "Multi Queue feature of Hitachi Gigabit Fibre
Channel adapter" (refer to "Multi-queue feature of Hitachi Gigabit Fibre
Channel Adapter") is enabled or disabled.
[Maximum size of the collected information]
(i) In the case of disabling the Multi-queue feature of HITACHI Gigabit Fibre
Channel adapter.
Syslog file size +
Configuration information of the driver and the system (about 3MB) +
adapter port specific information (about 8.5MB) x mounted adapter port
number.
(ii) In the case of enabling the Multi-queue feature of HITACHI Gigabit Fibre
Channel adapter.
Syslog file size +
Configuration information of the driver and the system (about 3MB) +
adapter port specific information (about 8.5MB) x mounted adapter port
32
number x .
【Syntax】
hfcrasinfo [-f] [-d <directory>] [-H <hostname>]
【Option】
-f : (y/n) Execute the command with omitting the confirmation message.
-d: Output the compressed file to the specified directory.
-H: Change 'hostname' field of the compressed file.
41