Hitachi GVX-CC64G*BX User Manual page 13

Gigabit fibre channel adapter
Table of Contents

Advertisement

Handling of the power cables
Always use the power cables shipped with the equipment, and follow the
instructions below: Failure to follow the correct handling practices may lead to
damage to the power cables to expose the copper wires, or overheating due to
short-circuiting or partial disconnection, which may cause electric shock or fire.
Do not place any object on the power
cables.
Do not pull the cables.
Do not apply pressure on the power
cables.
Do not fold the power cables.
Do not work upon the power cables.
Do not use the power cables near heat-
generating appliances.
Do not bundle the power cables.
Not designed to operate near volatile liquid
Do not use volatile liquids such as nail polish remover near the equipment.
Such volatile liquids could cause a fire if they enter inside the equipment and are
ignited.
Handling of the power plug
When inserting the power plug into the electrical outlet or removing it, be sure to
hold the plug section. Do not pull the cable; it may partially break the wire, heat
the broken part and lead to a fire.
If a long downtime is planned, remove the power plug from the outlet. The
equipment is live even when not in use, and any damaged components may
cause a fire.
Be sure to handle the power plug with dry hands when inserting or removing it
from the outlet. Handling it with wet hands may cause an electric shock.
Impact from falling
Do not let the plug fall or hit it against another object. It may cause internal
deformation and deterioration. Operating the equipment under such defective
conditions may lead to electric shock or fire.
Applicable power source
The equipment uses 200 VAC. Do not operate the equipment with a voltage other
than that specified. It may lead to internal breakage or electric shock or fire due to
overheating and deterioration (depending on the voltage magnitude).
WARNING
Do not subject the power cables to
ultraviolet or strong visible light
continuously.
Do not use the power cables past their
service life.
Do not expose the power cables to
alkali, acid, fat and oil, or humidity.
Do not use the power cables in a high-
temperature environment.
Do not use the power cables above
their specified rating.
Do not use the power cables for other
devices
xiii

Advertisement

Table of Contents
loading

Table of Contents