Hitachi GVX-CC64G*BX User Manual page 37

mount CD-ROM on the /media/cdrom directory.
# cp /media/hfc_media/linux/x86_64/sles12/*.rpm /tmp/
(2) Install the RPM packages
Install two RPM packages, driver and utility. You can install the two RPM
packages either with one command or one by one.
The following is an example of the driver version 4.12.18.3146 to explain the
procedure.
Only super user can install RPM packages.
# cd /tmp
Note 1) If you haven't login as super user, type 'su' to switch to super user
before executing the 'cd' command.
To install two packages together with one command :
# rpm -ivh --force htc-hfcldd-kmp-default-4.12.18.3146_3.12.28_4-1.sles12.
x86_64.rpm htc-hfcldd-tools-4.12.18.3146-1.sles12.x86_64.rpm
To install two packages one by one :
# rpm -ivh --force htc-hfcldd-kmp-default-4.12.18.3146_3.12.28_4-1.sles12.
x86_64.rpm
# rpm -ivh --force htc-hfcldd-tools-4.12.18.3146-1.sles12.x86_64.rpm
Note 2) When you install the RPM packages one by one, the driver has to be
installed before the utility. Otherwise the installation will fail.
Note 3) Utility is stored in /opt/hitachi/drivers/hba.
Note 4) Do not specify –U or –F option when executing rpm command.
Specifying these options may cause a system hung-up or a system crash.
Note 5) Be sure to install the both RPM packages, driver and utility. If no utility
is installed, the error log required for failure analysis cannot be collected.
(3) Confirm the driver version
Check the version.txt stored in /opt/hitachi/drivers/hba, and confirm that the
driver's version is same as the RPM package.
[Example: Install log]
#
more /opt/hitachi/drivers/hba/version.txt
*
Version 4.12.18.3146
(4) Load the driver
Reboot the system to load the new driver.
# reboot
Tue Oct 13 2015
16