Warning - Hitachi GVX-CC64G*BX User Manual

WARNING

Contact failure and tracking of the power plug
Comply with the following instructions for handling of the power plug.
Otherwise, tracking or contact failure may cause a fire.
Make sure that the power plug is fully and securely inserted into the electrical
outlet.
Before inserting the power plug, check that there is no dust or water on the plug.
If any dust or water is found, wipe it off with a dry cloth and then insert it.
Check that the outlet can firmly hold the plug.
Handling of batteries
The following actions must be avoided. Inappropriate handling may cause the
battery to overheat, burst, and leak, resulting in injury, smoke or fire.
Disassembling the battery
Heating beyond 100°C
Incinerating
Wetting
Using batteries other than those specified
Storage location for batteries
Keep batteries out of the reach of young children. There is a danger that they
might swallow them. Should a battery ever be swallowed, take care to secure a
breathing path for the child and immediately call for medical assistance.
Disposal of batteries
To dispose of batteries, consult your dealer or follow the relevant regulations and
rules of your country.
Storing batteries
When storing batteries, apply adhesive tape on the terminals for insulation. If the
batteries are stored without insulation, the terminals can contact each other to
cause a short-circuit and overheat or burst, leading to injury or fire.
Multiple connections to a single outlet not allowed
Do not connect multiple power cables to a single electrical outlet. Overheating of
the power cables or outlet may cause fire and trip the circuit breaker, stopping the
operation of other devices on the same circuit.
xiv