Choosing A Language; Selecting A U.s. Standard Or Metric Display; Setting An Exercise Session Time Limit - Precor 100i Owner's Manual

Choosing a Language

The equipment can display user prompts, text, and user entries in
several different languages. When the equipment is shipped from
the factory, it is set to display English.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
S E L E C T L A N G U A G E
1. At the
navigational arrow keys to choose a language.
2. When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in Accessing Club Programming Mode and Changing the
Settings.
Selecting a U.S. Standard or Metric
Display
The equipment can display measurements in either Metric or U.S.
Standard. The default factory setting is to display U.S. Standard. To
change this setting, perform the following steps:
S E L E C T U N I T S
1. At the
arrow keys to select a unit of measure (
2. When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in Accessing Club Programming Mode and Changing the
Settings.
Product Owner's Manual: Club Features
prompt, press OK. Use the
prompt, press OK. Use the navigational
U S or M E T R I C

Setting an Exercise Session Time Limit

You can limit how long a user can exercise on the equipment. For
example, if you set the time limit to 20 minutes, users can only enter
a session time between 1 and 20 minutes.
Note: The automatic cool-down period is appended to the end of
any time-based program, so adjust the time limit accordingly.
You can also let a user exercise indefinitely by selecting
However, you will need to instruct users that once they select a
program, they must press the TIME +/- key. A workout time blinks
in the display. They need to use the Number Keypad to type in 240,
press the up arrow key to display
The exercise session times available are between 1 and 240
minutes.
1. At the S E T M A X W O R K O U T T I M E
navigational arrow keys to change the displayed time limit.
Note: When you press and hold a navigational arrow key, the
number increments by five, for example, 1, 5, 10, 15, 20. When
you tap an arrow key, the number increments by one.
2. When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in Accessing Club Programming Mode and Changing the
).
Settings.
N O L I M I T
N O L I M I T , and then press OK.
prompt, press OK. Use the
.
13