Alcatel-Lucent 7210 Sas-x Service Manual page 453

service-using
Syntax service-using [cpipe] [sdp sdp-id] [b-vpls] [i-vpls] [m-vpls] [sdp sdp-id] [customer
customer-id]
Context show>service
Description
This command displays the services matching certain usage properties.
If no optional parameters are specified, all services defined on the system are displayed.
Parameters
[service] — Displays information for the specified service type.
b-vpls — Specifies the B-component instance of the Provider Backbone Bridging (PBB/IEEE
i-vpls — Specifies the I-component instance of the Provider Backbone Bridging (PBB/IEEE
m-vpls — Specifies the M-component (managed VPLS) instance of the Provider Backbone Bridging
sdp sdp-id — Displays only services bound to the specified SDP ID.
customer customer-id — Displays services only associated with the specified customer ID.
Output Show service-using output — The following table describes the command output fields:
7210 SAS-X, R6 OS Services Guide
802.1ah) feature. It represents the multi-point tunneling component that multiplexes multiple
customer VPNs (ISIDs) together. It is similar to a regular VPLS instance that operates on the
backbone MAC addresses.
802.1ah) feature. It identifies the specific VPN entity associated to a customer multipoint
(ELAN) service. It is similar to a regular VPLS instance that operates on the customer MAC
addresses.
(PBB/IEEE 802.1ah) feature.
Default
Services bound to any SDP ID.
Values
1 — 17407
Default Services associated with any customer.
Values
1 — 2147483647
Label
Service Id The service identifier.
Specifies the service type configured for the service ID.
Type
The desired state of the service.
Adm
The operating state of the service.
Opr
The ID of the customer who owns this service.
CustomerID
The date and time of the most recent management-initiated change to
Last Mgmt Change
this service.
VLL Show Commands
Description
Page 453