Vll Services Command Reference - Alcatel-Lucent 7210 Sas-x Service Manual

VLL Services Command Reference

Epipe Service Configuration Commands
Epipe Global Commands
config
7210 SAS-X, R6 OS Services Guide
• Epipe Global Commands on page 187
• Epipe SAP Configuration Commands on page 188
• Connection Profile Commands on page 192
• Show Commands on page 193
• Clear Commands on page 193
• Epipe Spoke SDP Configuration Commands on page 190
— service
— [[no] epipe service-id [customer customer-id] [create] [vpn vpn-id] [vc-switching] [svc-sap-
type {any | qinq-inner-tag-preserve}]
— no epipe service-id
— description
— no description
— [no]
— sap
— no sap
— service-mtu
— [no]
— [no]
— spoke-sdp
— spoke-sdp
— no spoke-sdp
description-string
endpoint endpoint-name [create]
— active-hold-delay active-endpoint-delay
— no active-hold-delay
— revert-time [revert-time | infinite]
— no revert-time
— standby-signaling-master
— [no] standby-signaling-master
sap-id [create]
sap-id
octets no service-mtu
service-mtu-check
shutdown
sdp-id[:vc-id] [vc-type {ether | vlan}] [create] [no-endpoint]
sdp-id[:vc-id] [vc-type {ether | vlan}] [create] endpoint
sdp-id[:vc-id]
Virtual Leased Line Services
Page 187