Using The Lock Function - Philips AP2266 User Manual

» If the air quality light is not blue,
the air purifier operates under
turbo mode for a maximum of
10 minutes, the air quality light
blinks slow during this time, and
then goes to the night sensing
mode.
Auto activating the night
sensing mode
•
If the air purifier operates in auto
mode or
allergen mode, when the
daylight sensor detects the lights
in your room are turned off, the air
purifier goes to the night sensing
mode automatically.
Note
• The daylight sensor detects the lights
in your room after 11 hours in the night
sensing mode.
• If the lights in your room are turned
on, the air purifier will quit the night
sensing mode and operate under the
previous mode. The air quality light
and the display will be on again.
• To exit the night sensing mode
manually, touch
or button.

Using the lock function

1
Touch and hold the lock button
for 3 seconds to activate lock
function.
» The lock icon
screen.
» When the lock is on, all
the other buttons are not
responsive, only icon
2
Touch and hold the lock button
for 3 seconds again to deactivate
lock function.
» The lock icon
the screen.
Note
• The lock function is automatically
unlocked when the pre-filter cleaning
code or the filter replacement code
displays on the screen.
displays on the
blinks.
disapears from
EN 13