Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Philips AP2266
Summary of Contents for Philips AP2266
- Page 1 AP2266 User manual...
-
Page 3: Table Of Contents
Contents 10 Notices 1 Important Electromagnetic fields (EMF) 2 Your air purifier Recycling Product overview Controls overview 3 Getting started Installing the filter 4 Using the air purifier Understanding the air quality light Turning on and off Changing the fan speed Daylight sensor Night sensing mode Using the lock function... -
Page 4: Important
Make sure that foreign appliance. • objects do not fall into the If the power cord is • appliance through the air damaged, you must have outlet. it replaced by Philips, a... - Page 5 If the power socket used • Only use the original to power the appliance • Philips filters specially has poor connections, intended for this the plug of the appliance appliance. Do not use any becomes hot. Make other filters.
- Page 6 Do not use this appliance Do not use the appliance • • when you have used in wet surroundings or in indoor smoke-type insect surroundings with high repellents or in places ambient temperatures, with oily residues, burning such as the bathroom, incense, or chemical toilet, or kitchen.
-
Page 7: Your Air Purifier
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview Control panel Air quality light Air outlet Air quality sensor Professional NanoProtect filter... -
Page 8: Controls Overview
Controls overview On/Off button Healthy sleep mode button Display screen Fan speed button Lock button... -
Page 9: Getting Started
3 Getting started Remove the filter. Installing the filter Note • Make sure the air purifier is unplugged from the electrical outlet before installing the filter. Remove all packaging materials • Make sure the side of the filter with the from the filter. -
Page 10: Using The Air Purifier
4 Using the air Attach the pre-filter back into the air purifier. purifier Understanding the air quality light Air quality light Air quality level color Blue Good Note Blue-violet Fair • Make sure the side with the clip is Red-purple Poor pointing towards you, and that all hooks of the pre-filter are properly... -
Page 11: Changing The Fan Speed
Touch to switch on the air purifier. Changing the fan speed There are several fan speeds available. You can choose the auto mode, speed 1, 2, 3 or turbo mode (t). Auto(A) • Touch the fan speed button repeatedly to select the auto mode. »... -
Page 12: Daylight Sensor
Manual Daylight sensor • Touch the fan speed button With the daylight sensor, the air purifier repeatedly to select the fan speed can work according to the ambient light you need. 10 seconds later after the ambient light dimmed, all the lights on the control panel will be go off slowly. -
Page 13: Using The Lock Function
» If the air quality light is not blue, Using the lock function the air purifier operates under turbo mode for a maximum of Touch and hold the lock button 10 minutes, the air quality light for 3 seconds to activate lock blinks slow during this time, and function. -
Page 14: Cleaning
5 Cleaning Cleaning the air quality sensor Clean the air quality sensor every Note 2 months for optimal functioning of the • Always turn the air purifier off and purifier. unplug the air purifier from the electrical outlet before cleaning. Note •... -
Page 15: Cleaning The Pre-Filter
Remove the air quality sensor cover. Cleaning the pre-filter Clean the pre-filter when F0 is displayed on the screen. Switch off the air purifier and unplug from the wall outlet. Pull the bottom part of the front panel to remove it from the air purifier. - Page 16 If the pre-filter is very dirty, use a Note soft brush to brush away the dust. Then wash the pre-filter under • Make sure the side with the two clips running tap water. is pointing towards you, and that all hooks of the pre-filter are properly attached to the air purifier.
-
Page 17: Replacing The Filter
6 Replacing the Take out the used air filter according to the filter alert light status filter displayed on the screen. Discard used filter. Filter replacement indicator This air purifier is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the air purifier is operating. -
Page 18: Storage
7 Storage Put the plug of the air purifier in the wall outlet. Touch and hold the for 3 seconds to reset the filter lifetime counter. Turn off the air purifier and unplug from the wall outlet. Clean the air purifier, air quality sensor and pre-filter (see chapter ‘Cleaning’). -
Page 19: Troubleshooting
This chapter summarizes the most common problems you could encounter with the air purifier. If you are unable to solve the problem with the information below, visit www.philips.com/support or contact the Consumer Care Center in your country. Problem Possible solution The air purifier •... - Page 20 Problem Possible solution The color of the air • The air quality sensor is dirty. Clean the air quality sensor quality light always (see chapter "Cleaning"). stays the same. • The first few times you use the air purifier, it may produce a plastic smell.
-
Page 21: Notices
(you find its phone number regarding exposure to electromagnetic in the worldwide guarantee leaflet). If fields. there is no Consumer Care Centre in your country, go to your local Philips dealer. Compliance with EMF Koninklijke Philips N.V. manufactures Order parts or... -
Page 22: Recycling
Recycling Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. - Page 24 © 2017 Koninklijke Philips N.V. All rights reserved.