Measure; Using Without Ios Device - iHealth HS4 Operation Manual

If "Lo" appears on the LED, replace all the batteries.
Rechargeable batteries are not suitable for this scale.
To avoid damage as a result of battery leakage, remove the batteries if the scale is
not going to be used for 3 months or more
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
The scale and the batteries must be disposed of according to local regulations at the end of
their service life.

3. MEASURE

STEP 1: Check that your iPod Touch, iPhone or iPad is listed under compatible models.
STEP 2: Check that the iOS is V5.0 or higher. If not, you may need to update your iOS
before using this product.
STEP 3: Open Bluetooth on your iPod Touch, iPhone or iPad
(Settings->General->Bluetooth->on).
a. Step the scale to make it switch on, the screen will display all segments one second, and
will display firmware version one second, then it will display "0.0".
b. Launch the "iHealth MyVitals App", the App will search the HS4.
c. Step on the scale, your weight measurement will be shown on the screen. If the scale is
connected to an iOS device and the app is running, the app will display the process of
the measurement.
d. When the scale gets your stable body weight, the screen will display and flash.
e. You can set the weight unit by the iOS App. The weight unit include: Kg, Lb, ST.

4. USING WITHOUT iOS DEVICE

After it has been used for the first time, the date and time of the scale will be
synchronized with the iOS device.
The measurement time is stored in memory and can be uploaded to iPod Touch,
iPhone or iPad when the connection is re-established. The scale can store 200 weight
6
Template version:1