HP OMEN W9S97AA User Manual page 10

3. Connect a USB upstream cable to the USB upstream connector on the rear of the monitor and the other
end to a USB downstream connector on the source device.
4. Connect one end of the power cord to the power supply (1) and the other end to a grounded electrical
outlet (2), and then connect the round end of the power supply cord to the monitor (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
Setting up the monitor 7