Kenwood Nexedge NX-5200 User Manual page 9

700/800mhz vhf/uhf digital transceiver
Hide thumbs Also See for Nexedge NX-5200:
Table of Contents

Advertisement

Do not disassemble or modify the transceiver for any reason.
Do not place the transceiver on or near airbag equipment while
the vehicle is running. When the airbag infl ates, the transceiver
may be ejected and strike the driver or passengers.
Do not transmit while touching the antenna terminal or if
any metallic parts are exposed from the antenna covering.
Transmitting at such a time may result in a high-frequency burn.
If an abnormal odor or smoke is detected coming from the
transceiver, switch the transceiver power off immediately,
remove the battery pack from the transceiver, and contact your
KENWOOD dealer.
Use of the transceiver while you are driving may be against
traffi c laws. Please check and observe the vehicle regulations
in your area.
Do not expose the transceiver to extremely hot or cold
conditions.
Do not carry the battery pack (or battery case) with metal
objects, as they may short the battery terminals.
Danger of explosion if the battery is incorrectly replaced;
replace only with the same type.
When attaching a commercial strap to the transceiver,
ensure that the strap is durable. In addition, do not swing the
transceiver around by the strap; you may inadvertently strike
and injure another person with the transceiver.
If a commercially available neck strap is used, take care not to
let the strap get caught on nearby machine.
When operating the transceiver in areas where the air is dry, it
is easy to build up an electric charge (static electricity).
When using an earphone accessory in such conditions, it is
possible for the transceiver to send an electric shock through
the earphone and to your ear. We recommend you use only
a speaker/microphone in these conditions, to avoid electric
shocks.
v

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexedge nx-5300Nexedge nx-5400

Table of Contents