Installing/ Removing The (Optional) Battery Pack - Kenwood Nexedge NX-5200 User Manual

INSTALLING/ REMOVING THE (OPTIONAL)
BATTERY PACK
Installing/ Removing the Battery Pack
Do not short the battery terminals or dispose of the battery by fi re.
◆
Never attempt to remove the casing from the battery pack.
◆
Install the battery pack after cleaning the battery pack contacts and
◆
the transceiver terminals.
Before charging a battery pack that is attached to the transceiver,
◆
ensure that the safety catch is fi rmly closed.
1 Match the guides of the battery pack with the corresponding
grooves on the upper rear of the transceiver, then fi rmly
press the battery pack to lock it in place.
2 Lock the safety catch to prevent accidentally pressing the
release latch and removing the battery pack.
3 To remove the battery pack, lift the safety catch, press the
release latch, then pull the battery pack away from the
transceiver.
2
1
2
3
Release latch
Safety catch