Installing The Cap Over The Universal Connector; Installing The (Optional) Speaker/ Microphone Or Headset - Kenwood Nexedge NX-5200 User Manual

INSTALLING THE CAP OVER THE
UNIVERSAL CONNECTOR
1 If you are not using an optional
speaker/ microphone or
headset, install the cap over
the universal connector.
2 Secure the cap in place using
the dressing screw.
INSTALLING THE (OPTIONAL) SPEAKER/
MICROPHONE OR HEADSET
1 Insert the guide of the speaker/ microphone or headset
connector into the groove of the universal connector.
2 Secure the connector in place using the attached screw.
Note:
◆ When not using an optional speaker/ microphone or headset,
install the cap over the universal connector.
4
Optional
speaker/ microphone
Universal
connector cap