Kenwood Nexedge NX-5200 User Manual page 20

c Transmit/ Receive/ Battery low indicator
Lights red while transmitting, green while receiving (on
Conventional channels only), and orange when receiving an
encoded call (i.e. 2-tone, DTMF signaling, etc.). Flashes red
when the battery power is low while transmitting. Replace
or recharge the battery pack when the battery power is low.
Note: This indicator can be disabled by your dealer.
d Lever switch
Switch the toggle position to activate its programmable
function. The O position turns the function ON. The ●
position turns the function OFF.
e Auxiliary (orange) key
Press to activate its programmable function.
f Side 1 key
Press to activate its programmable function.
g PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
h Side 2 key
Press to activate its programmable function. Acts as an Up
key for certain transceiver settings.
i Side 3 key
Press to activate its programmable function. Acts as a
Down key for certain transceiver settings.
j LCD Display
Refer to the display on page 8.
k Menu key
Press to activate its programmable function. The default
key setting is [Menu].
l Function key
Press to activate its programmable function. The default
key setting is [Function].
6