Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Profoon TX-168PHB
Summary of Contents for Profoon TX-168PHB
- Page 1 USERS MANUAL TX-168PHB...
-
Page 2: Declaration Of Networkcompatibility
The Caller-ID memory has a capacity of 30 calls, including the time and date of the call. The Caller-ID is linked with the dialer of the telephone. Any incoming call can be called black. The TX-168PHB has a phonebook memory of 35 numbers with names and the numbers can be dialed handsfree. -
Page 3: Installation
INSTALLATION Power supply: The TX-168PHB needs power to operate. Use the included power adaptor or install 4x 1,5 Volt battery, size AAA. Power adaptor: One power adaptor is included. Use this one or a version with the following specifications: input: 230 Volt, 50, Hz AC... - Page 4 ADJUSTING Language: press MENU 4 times, the display indicates “TAAL” (= language) press YES, the display gives “NEDERLANDS” (= Dutch) to select “ENGLISH” press YES Time: press MENU 2 times, the display indicates “CLOCK” press YES, the hour indication starts to blink to adjust the hours and press YES, the minute indication starts to blink repeat this procedure for the month and the date...
- Page 5 Last number memory: The TX-168PHB keeps track of the 9 last dialed numbers: press REDIAL/P and the last dialed number will come on the display press...
- Page 6 Teleservices: Buttons and # are functionbuttons, needed for divers telecom-services (teles- hopping, telebanking, etc) or to control divers telecom devices (PABX, answering machines, etc). Refer to the concerning manual. Calltimer: As soon as the handset is lifted or the speakerbutton is pressed, the calltimer keeps track of the call time.
- Page 7 See chapter Pause on page 4 in case a dialpause is required. It is possible to copy numbers, received by the TX-168PHB’s Caller-ID, into the dialmemory. In case the system also sends the name, this name will be copied too.
- Page 8 Dialing phonebook memories: leave the handset on the telephone press MENU, the display indicates “PHONE BOOK” press YES, the display gives “NAME ?” to step through the phonebook press, when he required name is on the display, the speakerbutton to dial the number as soon as the called party answers the call, you have to lift the handset to start the conversation...
- Page 9 This can also be the telephonenumber of a fax or of a mobile phone. On receipt of this information, the display of the TX-168PHB shows this number and stores it into its memory.
- Page 10 Read the memory: Press to start reading. Use buttons to step through the memory. Next to “CALL#”, the rotation number of that call is displayed. The lower part of the display gives the time and date of that call. Call back: leave the handset on the cradle and use to look for the number to be dialed...
-
Page 11: Tips & Remarks
Always disconnect the telephone from the telephoneline when replacing the bat- teries. PABX: In case the TX-168PHB will be connected to a PABX, check if the PABX is suita- ble for Caller-ID. If not, the TX-168PHB has to be connected directly to the public telephone network. -
Page 12: Maintenance
Never use chemical cleansers to clean the cabinet, the cabinet may only be cle- aned with a moist cloth. Don't place the TX-168PHB on furniture with cellulose based coating; the rubber feet will leave stains on the cellulose. Under certain circumstances the sound of the TX-168PHB might be influenced by electromagnetic fields of electronic devices like TV, computer or radio trans- mitters close to the telephone. -
Page 13: Guarantee Card
This at the importers discretion. It is only possi- ble to claim to the guarantee when you enclose your purchase ticket with the TX-168PHB. HOW TO ACT: If you notice a defect, consult the manual first. If this manual gives you no defini- te answer, consult your dealer with a clear description of your complaint.
Need help?
Do you have a question about the TX-168PHB and is the answer not in the manual?
Questions and answers