Advertisement
Advertisement
Table of Contents
Related Manuals for Profoon TX-112
Summary of Contents for Profoon TX-112
- Page 1 User manual TX_112 Fout! Bladwijzer niet gedefinieerd.
- Page 2 CONTROLS 1. line wire jack 8. tone/pulse switch 2. ringer switch 9. keyboard 3. handsetwire connections 10. redial/pause button 4. number index card 11. MEMO button 5. handset guide 12. STORE button 6. hookswitch 13. teleservice button 7. loudspeaker Fout! Bladwijzer niet gedefinieerd.
-
Page 3: How To Connect
Plug the telephone plug in your telephone-outlet The TX-112 is ready for use. WALLMOUNTING. To mount the TX-112 on to a wall, drill two holes in the wall on top of each other with a distance of 10cm and insert two plugs with screws. -
Page 4: Outgoing Calls
HOW TO USE Tone/pulse: Select the dial-mode, using switch 8. select PULSE in case you are connected to a rotary dialling telephone exchange; select TONE in case you are connected to an electronic telephone exchange. Outgoing calls Lift the handset, wait for the dialtone and key in the telephone. -
Page 5: Incoming Calls
* one time. all coming key-presses will now be dialled-out in tone-mode. MEMORIES The TX-112 has a memory-capacity of 10 TWO-TOUCH telephone numbers. Store memory: lift the handset; press STORE [12] one time;... -
Page 6: Redial Memory
Redial memory: lift the handset and wait for the dialtone; press MEMO [8] and the required memory button (0-9) to automatically dial one of the memory numbers; replace the handset to end the conversation. Pause: When connected through a PABX, is might be necessary to add a pause after the prefix number (mostly the first 0).
Need help?
Do you have a question about the TX-112 and is the answer not in the manual?
Questions and answers