Cassette Operation; Cassette Encoding - boytone BT-22-B Instruction Manual

Cassette Operation

1. Turn the volume knob clockwise to turn the equipment on.
2. Use the function selector to select TAPE/AUX mode.
3. Insert a cassette with the tape facing away from you, as illustrated on the right. The EJECT/FAST
FORWARD button will pop out and
the system will start playing the tape automatically.
4. Turn the volume knob to your desired level.
5. To fast forward the cassette tape, press the EJECT/FAST FORWARD button halfway down while
the cassette is playing. The tape will be advanced forward rapidly.
6. To resume normal playback, slightly press the EJECT/FAST FORWARD button again. The button
will fully pop out again.
7. To stop playback, press the EJECT/FAST FORWARD button completely. Playback will
be stopped and the cassette tape will be ejected.
IMPORTANT!
When using the cassette deck:
 Make sure to insert the cassette in the correct direction.
 To avoid damaging the cassette, we strongly recommend taking it out of the
equipment after playing the cassette.

Cassette encoding

1. Set the function button to TAPE/AUX/BT IN mode and then insert a memory device (USB drive,
SD or MMC card).
2. Press the record
USB or SD icon will be flashing on the LC display.
3. Press the skip up
encoding, then press the record
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start the encoding mode after a few seconds. Insert your cassette into the playback
slot. During encoding, the USB or SD icon will be flashing on the display.
5. To finish encoding, press the stop
TAPE/AUX / BT IN mode.
NOTE:
 The recording format is preset at MP3 bit rate 128 kbps.
 The recording speed is 1:1. Recording will take as long as playing the record.
REC button, it will take 3 - 4 second to read the memory device, then the
or skip down
REC button again to confirm.
button to select the desired mode (USB or SD) for
button. The display will show "END" and return to
8