boytone BT-22-B Instruction Manual page 9

Listening to the CD player
1. Turn the volume knob in a clockwise direction to turn the equipment on.
2. Use the function selector to select CD mode.
3. Press the Open CD tray button.
4. Unit will auto load and read the number of tracks.
5. Press Play button to play selected CD track. Press next or previous buttons to play respective track.
CD encoding
1. Set the function button to CD/USB/SD mode and then insert a memory device (USB drive, SD
or MMC card).
2. Press the record
USB or SD icon will be flashing on the LC display.
3. Press the skip up
encoding, then press the record
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start the encoding mode after a few seconds. Insert your cassette into the
playback slot. During encoding, the USB or SD icon will be flashing on the display.
To finish encoding, press the stop
to CD/USB/SD mode.
The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the memory media connected
to the USB port or SD/MMC card slot.
1. Turn the volume knob clockwise to turn the equipment on.
2. Following the illustration below, insert a USB device face up into the USB port, making sure it is fully
inserted. Alternatively, insert a memory card in the direction of the arrow (as shown on the label next to
the memory card slot), making sure to insert it straight without bending
.IMPORTANT: Connecting the USB device upside down or backwards could damage the audio
system or storage media (USB drive, SD or MMC card). Check to ensure the direction is correct before
connection.
REC button, it will take 3 - 4 second to read the memory device, then the
or skip down
REC button again to confirm.
button. The display will show "END" and return
button to select the desired mode (USB or SD) for
9