The Record Player - boytone BT-22-B Instruction Manual

Turntable/cassette /cd player/radio/usb/sd audio system with speakers, bluetooth in & out
Hide thumbs Also See for BT-22-B:
Table of Contents

Advertisement

The record player

IMPORTANT!
When using the turntable:
• Make sure to remove the stylus protector, as illustrated on the right. (It should easily slide off the
stylus assembly.)
• Make sure to unclip the tone arm lock before use and to secure it again after use.
Playing a record
1. Open the dust cover and turn the volume knob clockwise to turn the equipment on.
2. Use the function selector to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on the record to be
played.
4. Set the auto stop control to ON if you want the turntable to stop turning when it has reached the end
of the record. If the switch is set to OFF, the turntable will continue turning at the end of the record.
5. Place the record on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm park, then slowly move the
arm to the record, as illustrated on the right. The turntable will start rotating.
7. Move the lift lever towards the front, the tone arm will gently drop onto the record and playback will
start.
8. To stop playback, move the lift lever towards the back to raise the tone arm. The turntable will still be
rotating but the record will stop playing. To continue playback, move the lift lever towards the front.
9. To play a different piece on the record, move the lift lever towards the back, move the raised tone
arm to the start of the piece and then move the lift lever towards the front to lower the tone arm and
start playback.
10. To adjust the volume level, turn the volume knob to the right or left.
11. At the end of the record, move the lift lever towards the back to raise the tone arm and move it back
to the tone arm park, and then move the lift lever towards the front to lower the arm onto its rest.
12. Alternatively, lift the tone arm off the record and return it to the arm rest manually.
13. When you have finished playing records, engage the tone arm lock to protect it from accidental
movement. Turn the volume knob in a counterclockwise direction to switch the unit off. Unplug it from
the power supply if you are not going to use it for a while.
NOTE: Should your record stop before the last track finishes, set the auto stop control to OFF. Your
6

Advertisement

Table of Contents
loading

Table of Contents