Advertisement
Flipper-36
Assembly Diagram
R
T
I
EAD
HROUGH
NSTRUCTIONS FROM BEGINNING
BEFORE
TO END
STARTING TO ASSEMBLE UNIT
1.)
Identify and Separate all the Parts and Hardware.
Slide the Right Side Handle (P7) Through the Right Leg (P-3) and into the Welded Rod (P5) as
2.)
shown in illustration #1. Rotate Right Side Handle (P7) until holes are aligned
(See illustration#1). Secure using 1 Screw (A).
3.)
Slide the Left Side Handle (P6) Through the Left Leg (P-2) and into the Welded Rod (P5) as
shown in illustration #1. Rotate Left Side Handle (P6) until holes are aligned
(See illustration #1). Secure using 1 Screw (A).
Be sure that Pin is inserted
through slot.
P7
P3
P5
A
.
A
P2
3
(A) Screw M6 X 9/16"
For Scale only
Illustration # 1
P6
Advertisement
