Balt Flipper-36 Assembly Instructions Manual page 5

6.) Place the Top Platform (P1) with the insert nuts facing up. Attach Right Leg (P-3) and Left
Leg (P2) using 4 each (B) screws
(Finger tighten only)
Attach 4 each (D) Locking Casters to the front and back of the Right Leg (P-3) and Left
7.)
Leg (P2). Tighten Casters using Caster Wrench (F).
(Tighten all screws using Allen Wrench (E).)
D
B
P1
Illustration #4
as shown in illustration #4
P3
.
P2
5
(B) Screw M6 X 1-7/8"
For Scale only
D
B