Advertisement
#89821 Role Model
To Assemble:
1.
Identify and Separate all the Parts and Hardware.
2.
Place the Left Side Panel (P-1) with the Predrilled holes facing up. Attach 1
to Left Side Panel (P-1) and secure using 3 Wood Screws (A3) as shown in illustration # 1.
(See Slide Detail on Page 3)
3.
Install 3 each Cam Posts (E) in the 3 threaded insert nuts (Pre-installed)
as shown in illustration # 1.
4.
Install 4 each Wood Dowels (F) in the 4 Holes as shown in illustration # 1.
5.
Install 2 Cam Locks (D) into the 2 large
holes as shown in illustration # 1
P-1
6.
Attach 1 each Door Magnet (M) to the Left Side Panel (P-1)
and secure using 2 Wood Screws (A4) as shown in illustration
# 1.
Assembly Diagram
B
D
A4
F
4
Keyboard Slide (B)
M
A3
F
E
Illustration # 1
Advertisement
