Advertisement
Study Carrel
Assembly Diagram
R
T
I
EAD
HROUGH
NSTRUCTIONS FROM BEGINNING
BEFORE
TO END
STARTING TO ASSEMBLE UNIT
1.)
Identify and Separate all the Parts
and Hardware.
2.)
Place the Upper Shelf Platform (P4) with the Holes facing up and install 6 each
Cam Locks (G) into the large holes as shown in illustration # 1.
Illustration # 2
H
3.)
Place the Back Panel (P5) with the insert nuts facing up and install 4
each Cam Locks (G) into the large holes as shown in illustration # 2.
4.)
Install 4 each Cam Posts (H) in the 4 threaded insert nuts
(Pre-installed) as shown in illustration # 2.
.
G
3
P4
P5
Be sure that arrow on
top of Camlock (G)
aligns with centerline of
Edge Drilled hole.
Illustration # 1
G
Phillips
Screwdriver
Arrow
Centerline of
Edge Drilled
hole.
Advertisement
