Balt Flipper-36 Assembly Instructions Manual page 4

4.) Attach Metal Stability Panel (P4)
and Crossbrace (P-8) to the Right
Leg (P-3) and Left Leg (P2) using
2 Screws (A) and 2 Screws (A1)
as shown in illustration #2.
(A) Screw M6 X 9/16"
For Scale only
(A1) Screw M6 X 1-3/8"
For Scale only
5.) Insert Spring on Right Leg (P3) into the hole in Welded Rod
in illustration # 3
(P5) as shown
Insert Spring
Through Hole
P3
A1
A
.
P3
P4
P8
Hole for
Spring
Spring attached
to Leg(P3)
P5
Illustration #3
4
Illustration #2
P2
Detail
Welded Rod (P5)