Advertisement
8.)
To install Grommet (C), separate parts and press
Grommet Sleeve in rectangular openings in Top
Platform (P1) as shown in illustration #5.
9.)
Snap 2 plastic Caps over top of Sleeve as shown
in illustration #5.
Sleeve
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
Cap
Important
Cap
C
6
Grommet(D) installation
Illustration #5
Grommet (C)
Cap
Sleeve
P1
89870- 12/07/06
Cap
Advertisement
