Open the box
Open the box and remove
1
the accessories and the
cushion.
Open the top cover, and
4
remove the cushions by
the extruder
Remove the cushions by
7
the print bed.
7
Insert the USB flash drive to install XYZware
10
for printing.
P 3
Note: All packaging materials should be removed before powering up the printer.
Take out the printer by
2
the grip holds.
Remove the cardboard.
5
Remove the cardboard.
8
Cable tie
Tape x2
x1
Packing support x2
Use the USB cable to connect the printer
11
to PC. Connect the power cord to the
printer then turn on the power switch.
Remove plastic bag and
3
all tapes.
Remove the tape on the
6
print bed.
Remove the bottom
9
screw and plastic piece
under print bed.
V1