Load Filament - XYZ Printing da Vinci 1.1 Plus Quick Manual

Load Filament

First install the cartridge to the cartridge slot...
1
Remove the filament
stopper and tape.
5 Insert filament into the guide hole until the printer starts to load filament.
(When the loading begins, you will hear the sound of motor and can see
the filament is pulled into the printer.)
Note : Before pushing the filament into the guide hole, please cut the tip of the filament off at a 45°
angle with a cutting pliers, filament loading will be easier.
6 If filament doesn't come out from the nozzle,please press "Retry" or "Cancel". When filament is
dripping off the nozzle,tap
P 5
2
Install the new filament
cartridge into the empty slot.
4 Select "Filament" > "Cartridge " > "Load".
Top
cover
to finish.
3
Place and push to click the cartridge.
Guide
Hole
Cartridge
V1