Harman Kardon GO + P L AY WIRELESS Owner's Manual page 5

HARMAN KARDON
GO + PLAY WIRELESS
Listening to Audio from a Bluetooth-Capable Device
1. Press the Harman Kardon Go + Play Wireless's "Power" button. The green LED will illuminate.
2. The Harman Kardon Go + Play Wireless unit will automatically enter the Bluetooth pairing mode.
3. Perform a new device search on your Bluetooth-capable device.
4. Select "GO+PLAY WIRELESS" on the device's pairing list. If the device asks for a passcode,
enter 0000.
5. When pairing is successful the Harman Kardon Go + Play Wireless's green LED will change
to solid blue.
6. Control playback from your Bluetooth-capable device.
To pair with a different device, press and hold the Power button until the LED turns green, then
repeat steps 3 – 5 above.
Listening to Music and Watching Videos and Photos from a
docked iPhone/iPod
1. Dock your iPhone/iPod device in the nest and press the Harman Kardon Go + Play Wire-
less's "Power" button.
2. To play music: Use the controls on your iPhone/iPod device to make selections and control
the iPhone/iPod device and the Harman Kardon Go + Play Wireless.
To play videos: Use a standard S-Video cable (not included) to connect the Harman Kardon
Go + Play Wireless's S-Video output to a compatible video-display device. Make sure that
your iPhone/iPod device's Video and/or Photos functions are set to "On." Use the controls
on youriPhone/iPod device to make selections and control the iPhone/iPod and the Harman
Kardon Go + Play Wireless.
3. Adjust volume using the Volume Up ("+") and Volume Down ("–") buttons located on top of
the unit.
Listening to Music from an Auxiliary Device
1. Connect the auxiliary device's output into the "Aux in" jack by using a stereo 3.5mm (1/8"
auxiliary cable (not supplied).
2. Press the "Power" button located on top of the Harman Kardon Go + Play Wireless system
to turn on the unit.
3. Control music playback through the auxiliary device.
4. Adjust volume using the Volume Up ("+") and Volume Down ("–") buttons located on top of
the unit.
Charging Your iPhone/iPod
1. Make sure your iPhone/iPod device is securely docked in the Harman Kardon Go + Play
Wireless unit by using the supplied nest.
2. Make sure that the Harman Kardon Go + Play Wireless unit is connected to a live electrical
outlet. Note: The Harman Kardon Go + Play Wireless system will not charge other devices.
3. The Harman Kardon Go + Play Wireless unit will not charge an iPhone/iPod device while
running on battery power.
USB Synchronization and Charging
The Harman Kardon Go + Play Wireless system features a USB synchronization and charge
port. This allows you to synchronize a docked iPhone/iPod device with iTunes, and will charge
a docked device even when the Harman Kardon Go + Play Wireless is operating on battery
power.
1. Connect the Harman Kardon Go + Play Wireless's USB port to a computer using a USB cable
(not supplied).
2. Dock your iPhone/iPod device in the Harman Kardon Go + Play Wireless.
3. iTunes will synchronize with the iPhone/iPod device.
5
Bluetooth Pairing