HARMAN TrueStream, which guarantees peak wireless sound and clarity. The Harman Kardon Go + Play Wireless system will meet all your listening and travel needs, allowing you to immerse yourself in your favorite music wherever you are.
4. Press the Power button. The Status LED will illuminate white. 5. When Go+Play Wireless is on, press the Power button to put it into the standby mode; when Note: System will not use battery power when using AC power. When the batteries are low, the it is in standby, press the Power button to turn it on.
HARMAN International hereby declares that this equipment is in compliance with the essential requirements 2. Make sure that the Harman Kardon Go + Play Wireless unit is connected to a live electrical and other relevant provisions of Directive 1999/5/EC, ErP 2009/125/EC Directive and RoHS 2011/65/EU outlet.
Check the EQ setting on your iPhone/iPod or source device. It is recommended that you set the source device EQ to “Flat” or “Off.” Harman Kardon Go + Play Wireless unit emits a loud hum Aux In cable is not plugged in properly. Check the Aux In cable connection.