General Setup; Battery Installation; Battery Disposal - Harman Kardon GO + P L AY WIRELESS Owner's Manual

HARMAN KARDON
GO + PLAY WIRELESS

General Setup

1. Unpack the Harman Kardon Go + Play Wireless system.
2. Place the nest into the docking station.
3. IMPORTANT: Turn the adjustable knob in the center of the docking station to properly sup-
port your specific iPhone/iPod model.
4. Place the iPhone/iPod device into the docking station.
5. Connect the power supply into the "DC In" jack.
6. Plug the adapter into the wall outlet.
7. If you prefer to use batteries, install eight (8) type D batteries into the bottom of the unit.
8. Press the Power button. The green LED will illuminate.
DC In USB S-Video Aux In
Power Button
Volume Down Volume Up
(Multi-Color LED)

Battery Installation

1. Unscrew the two battery-compartment cover screws counterclockwise to the unlocked
position; remove the battery-compartment cover.
2. Place eight (8) fresh D-cell batteries as shown.
3. Replace the battery compartment cover.
Note: System will not use battery power when using AC power.
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT.

Battery Disposal

Alkaline batteries are considered nonhazardous. Rechargeable batteries (i.e., nickel cadmium,
nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials
and may pose an unnecessary health and safety risk.
In the European Union and other locations, it is illegal to dispose of any battery with household
trash. All batteries must be disposed of in an environmentally sound manner. Contact your lo-
cal waste-management officials for information regarding the environmentally sound collection,
recycling and disposal of used batteries.
4
General Setup