Selecting The Temperature Format (F3); Reset - Honeywell ASC02-01WM Installation And Operating Instructions Manual

Operation
CONDITION FOR
ACTION
8.2.8
CONDITION FOR
ACTION
8.2.9
CONDITION FOR
ACTION
28
• The F2 menu is open
► Press the SET button for approx. 2 seconds until either "oFF"
or "on" flashes.
► Toggle between "oFF" and "on" using the
► To save the setting, press the SET button.

Selecting the temperature format (F3)

• The F3 menu is open
► Press the SET button for approx. 2 seconds until either "°C" or
"°F" flashes.
► Toggle between "°C" and "°F" using the
► To save the setting, press the SET button.

Reset

The reset function causes the controller to revert to its factory
settings, these are as follows:
P1 P2 P3
60 8 4
• The RESET menu is open
► Press the SET button for approx. 5 seconds until "RESET"
flashes.
The controller reverts to its factory settings.
–
F1 F2 F3
oFF oFF °C
ASC02-01WM
or buttons.
or buttons.
EN2B-0365GE51 R0710