Setting The Storage Tank Maximum Temperature (P1); Setting The Switch-On Temperature Difference (P2); Setting The Switch-Off Temperature Difference (P3) - Honeywell ASC02-01WM Installation And Operating Instructions Manual

Operation
8.2.3
CONDITION FOR
ACTION
8.2.4
CONDITION FOR
ACTION
8.2.5
CONDITION FOR
ACTION
26

Setting the storage tank maximum temperature (P1)

DANGER
Risk of scalding due to storage tank temperature of over
60 °C!
► Install a thermostatic mixer in the hot water pipe and set to a
maximum 60 °C.
• The P1 menu is open
► Press the SET button for approx. 2 seconds until the storage
C
tank maximum temperature flashes.
► Change the storage tank maximum temperature using the
or buttons.
► To save the value, press SET button.

Setting the switch-on temperature difference (P2)

• The P2 menu is open
► Press the SET button for approx. 2 seconds until the switch-on
temperature difference flashes.
► Change the switch-on temperature difference using the
buttons.
► To save the value, press the SET button.

Setting the switch-off temperature difference (P3)

• The P3 menu is open
► Press the SET button for approx. 2 seconds until the switch-off
temperature difference flashes.
► Change the switch-off temperature difference using the
buttons.
► To save the value, press the SET button.
ASC02-01WM
or
or
EN2B-0365GE51 R0710