Table of Contents
Advertisement
ASC02-01WM
NOTE
EN2B-0365GE51 R0710
► Choose a suitable installation site.
► Drill the upper fastening hole.
► Screw in the screw.
► Remove the upper case.
► Hang the case in the recess
► Mark the position of the lower fastening holes
► Remove the case again.
► Drill the lower fastening holes.
► Hang the case up again in the recess
► Screw the case firmly using the lower fastening holes
and
.
► Mount the upper case.
4.3
Electrical connection
WARNING
Risk of death by electrocution!
► Remove the controller from the power supply before opening
the case.
► Observe all guidelines and regulations of the local electricity
supplier.
The device is to be connected to the grid by means of a plug with
grounding contact, or in the case of a fixed electrical installation
via a disconnection device for complete disconnection in
accordance with the installation guidelines.
.
,
.
Installation
.
15
Advertisement
Table of Contents
