Installation; Opening / Closing The Case; Opening The Case - Honeywell ASC02-01WM Installation And Operating Instructions Manual

ASC02-01WM
4.1.1
EN2B-0365GE51 R0710

4 Installation

4.1

Opening / closing the case

DANGER
Risk of death by electrocution!
► Remove the controller from the power supply before opening
the case.
► Make sure that the power supply cannot be unintentionally
switched on.
► Do not damage the case.
► Only switch the power supply back on after the case has been
closed.
The top of the case will be fixed with two clips and one screw on
the lower case.

Opening the case

► Loosen the screw and remove the upper case in an upwards
direction.
Clips
Upper case
Lower case
Installation
Operating
buttons
Screw
13