2 Get started
2.2 Turn on/off your printer
When your printer is connected to a host (a computer), it is good to turn on
the printer before turning on the host, and turn off the host before turning
off the printer.
2.2.1 Turn on your printer
1. To turn on your printer, turn on the Power Switch as below. The "I" is the
ON position.
2. Both status lights glow solid orange for a few seconds, and then LED 2
goes out, while LED 1 turns to solid green.
Note If you connect the printer to the internet or insert a USB drive
before turning on the printer, it will take longer for the printer to enter
the online mode (LED 1 glows solid green) after you turn it on.
9
Turn on/off the printer