Stopping A Treatment; Dermalux Tri-Wave Operating System; Manual Mode - Dermalux Tri-Wave User Manual

Stopping a Treatment

To STOP a treatment press the START/STOP button. The LEDs will switch OFF and
the timer will display the treatment summary indicating wavelengths delivered and the
treatment time for each wavelength.
®
Dermalux Tri-Wave Operating System
®
Dermalux Tri-Wave software allows the user to select either
i. Treatment parameters such as wavelength and treatment time (Manual mode).
OR
ii. Preset treatment programs (Pre-programmed Mode).
i. Manual Mode
Activating the Dermalux
STEP 1. Selecting the TREATMENT TIME and WAVELENGTHS
1. Using the UP/DOWN buttons, scroll through the menu of preprogrammed
treatments. Use PAGE to jump to the next screen.
2. Select Manual from the treatment options by pressing
the SELECT key.
3. The Manual mode screen will be displayed.
4. Use ENTER to toggle forward and ENTER to select the
wavelength
5. Use the UP/DOWN buttons to switch wavelengths
ON/OFF. Press ENTER to confirm.
6. Use UP/DOWN buttons to increase or decrease
treatment time (units of 1 minute). Press ENTER to
confirm.
7. Use MENU to toggle back.
8. Press ENTER to confirm selection.
Dermalux Triwave User Guide 2015
®
Tri-Wave System is a 3 step process.