Startup Of Heated Units - Graco Reactor E-10 Instructions-Parts List Manual

Startup of Heated Units

Equipment surfaces can become very hot.
To avoid severe burns:
• Do not operate Reactor E-10 without all
covers and shrouds in place.
• Do not touch hot fluid or equipment.
• Allow equipment to cool completely
before touching it.
• Wear gloves if fluid temperature exceeds
110°F (43°C).
1.
Perform Setup, pages 13-18.
2.
Set function knob to Slow Recirc
Fast Recirc
3.
Turn on Heater Power.
4.
Temporarily set heater control knobs to
maximum setting.
313221A
.
OR
5.
Circulate through heaters until tempera-
ture readouts display desired tempera-
ture.
6.
Adjust heater control knobs as neces-
sary for a stable spray temperature.
or
Startup of Heated Units
19